Choosing a Slab for a Live Edge Dining Table, Coffee Table or Desk

Start with a sketch of the finished top. Mark where you want the natural edge to show and where the base or frame will sit. Add the finished length, width and thickness so you can see which parts of a slab you’d need to keep.

Our Irish-grown slabs include oak, ash, beech and sycamore, depending on stock. For available sizes and drying options, browse our live edge slabs.

Measuring a Live Edge Dining Table Slab

Check the usable width at several points along the length you plan to keep. Where bark is still attached, measure between the solid timber edges. Check that the narrowest point gives you the width you need after any trimming.

Look at both ends for splits that could shorten the top. Mark where you’d trim the ends and measure the length you’d have left. A bowed or twisted slab may need more timber removed to make it flat. Tell your joiner the finished thickness you want so they can check how much you need to start with.

Check whether the slab is air-dried or kiln-dried and ask for its current moisture reading before you buy. Wood can take up or lose moisture as the air around it changes. Tell your joiner where the furniture will be placed so they can advise on a suitable moisture level for the timber.

Grain, Colour and Spalted Timber

Oak and ash can show a strong grain pattern. Beech can have a pinkish tint, and sycamore is worth looking at if you want a pale surface. Look at both faces and check where knots and changes in colour would fall within the part you plan to keep.

If you like spalted timber, look for the dark lines that can run through spalted beech. Decide where you’d like those markings to show on the finished top. If there are any soft or crumbly areas, have your joiner check the slab, especially if those areas would sit along an edge or where the base attaches.

Checking the Fit for Coffee Tables and Desks

For a live edge coffee table, make a full-size paper template of the top. Move it along the slab to find a section where the grain and natural edge fit the shape you want. Try the same template on the floor at home to see how much space the widest point leaves around the sofa.

For a wood slab desk, check the usable depth where the screen and keyboard will sit, especially if the front edge curves in. If the desk will sit against a wall, measure from the straight cut you’d make at the back.

Mark any cable holes on your sketch before settling on a slab. If you use a clamp-on monitor arm, check that the clamp fits the planned thickness and has a flat area to grip.

For ideas for tables, desks, worktops and shelves, see our live edge slab projects.

Get a Quote for Live Edge Stock

Tell us what you’re making and the finished length, thickness and minimum usable width you need. Include your preferred timber species and any drying requirements, and we’ll check which slabs we have in stock.

If you have a sketch, you can include it to show where you’d like the natural edge. You can also call us on 046 90 21240 to discuss your project.