Timber Guides

If you’re planning a timber project, start with where the wood will sit and how you’ll use it. A board for a garden deck needs to cope with rain, while a slab for a dining table needs enough width where its natural edge curves in. Our guides cover what to look for before you order and what to consider when fitting, finishing or restoring timber.

Choosing timber for your project

Hardwood vs Softwood Timber

Compare oak, Douglas fir and hemlock, from the grain you’ll see on a finished tabletop to the details that matter when ordering a beam.

Best Timber for Decking and Outdoor Use

The boards you walk on and the frame underneath can face different levels of damp. Find out what to check when choosing deck boards, joists and posts.

Choosing and finishing live edge slabs

Choosing a Live Edge Slab

Work out how much of the slab you can use after trimming the ends, and where the natural edge will sit in relation to the table base or the back of a desk.

Finishing a Live Edge Slab

Follow the steps for removing loose bark and sanding live edge wood. Learn how to fill a knot or split with epoxy and how to test an oil finish on an offcut.

Fitting and restoring timber beams

How to Fit a Floating Mantel Beam

See how to measure the length, height and depth of a mantel, and which fireplace clearances and concealed fixings to discuss with your installer.

Cutting Oak and Restoring Wooden Beams

Find out what to check before cutting or notching a new beam. If you’re restoring an older one, see how sanding and sandblasting can affect the grain and original tool marks.

Get a Timber Quote

Send us the finished sizes, quantity and preferred timber for your project. We’ll check what we can cut or supply from our sawmill in Gainstown, Navan, Co. Meath.